"This box gives me terps for days!"
"I wouldn't do it any other way."
"Just Wow..."

When drying and curing, rapid water loss, unstable temperature and uncontrolled moisture are the enemy.

Growing  and managing small harvests has never been more important.  Home growers and local caregivers growing for patients, want to control every step of the process.  After putting so much care into the grow process, it is so very critical to assure the the product is dried and cured in a clean, correct environment.  

The Cannatrol™ Cool Cure assures not only a terrific aesthetic result with superior organoleptic properties, but keeps the harvest free of pests and mold (both visible and invisible) that can destroy a harvest or worse.

The process starts with gentle controlled water removal.  A dry cycle might last anywhere from 4-7 days depending on the cultivar and your personal preferences.  

Program the temperature and dew point conditions you prefer and the length of time.

Using the 'ramp' function, you can gently control the rate of water loss.  

Then, glide right into the cool cure mode.  Select your temperature and dew point and let the Cool Cure hold your harvest in a perfectly controlled environment for as long as you like! No burping, no maintenance.

When your are satisfied with your cure, store in a sealed container  or continue to hold in your Cool Cure until you are ready to share and and enjoy.  If packing in a sealed jar we suggest you include a desiccant pack too to maintain the perfect texture.  enjoy.

Buy a Cool Cure Now
Why Relative Humidity (RH%) is NOT a Good Measure

Let's nerd out for a minute here...

Relative Humidity or RH% is probably one of the most misunderstood terms we use when referring to drying and curing.RH% is made up of 2 absolute numbers: Dry Bulb and Dew Point Temperatures. This means that you can have the same RH% at 50° degrees and 80° degrees.

Think about that for a minute... by using temperature and dew point we control the Vapor Pressure... and have 100% control of the process.
Wait a minute...no burping?Let's nerd a little more

Q: Why do we burp?
A: Simple.  To release residual moisture so our product doesn't grow mold. So every single time you open that jar - things go all out of whack.

Here's the problem...

If you open your jar on a crisp cold day in Vermont, you are exposing your flowers to really dry air... If you open your jar on a hot humid day in Florida - you just let in all that wet air..
That's what Vaportrol Technology does for you.  It stabilizes conditions.  There is never 'excess' free water and you are holding your product at the perfect temperature and vapor pressure all the time.

No Burping - No Kidding
NOTES FROM SOME OF OUR USERS:
Some of our users have multiple cabinets for larger batch harvesting
Some users suggest harvesting and hanging the whole plant for a day or two to support chlorophyll conversion and remove some water weight - then trim and load the box for higher capacity.  
Users are working in the 65-68 Temp and 48 degree dew point  range(about 60% RH) zone and getting great results
The Cool Cure is being used for storage after the dry/cure is done, keeping inventory really fresh

Our patent pending Vaportrol™ Technology takes the guess work out of drying and curing.
Cannatrol is The Best Cure For Your Buds
Buy a Cool Cure Now
Is a proper dry & cure system your missing link?
Call us today to learn more
Order Now